FLiteTraX ULTRA BLE or 5G 1.8-2.6g
FLiteTraX ULTRA Tag
FLiteTraX ULTRA is tiny GPS-Solar-ACC tracker that uses either INTELINK to transmit data directly via Bluetooth to mobile phone or to autonomous long range Bluetooth gateway, or uses the 5G cell phone network to upload data directly to the cloud server.
Data upload ULTRA Intelink
Transmission method: INTELINK based on Bluetooth 5.0
Maximum uplink/downlink speed: 1 Mbps/1 Mbps
Output power: 8 dBm
Transmission distance: 80~120m with ordinary smart phone; up to 1200m with Debut series gateway products.
Data upload ULTRA 5G
ULTRA 5G supports both NB-IoT and LTE-M (or called eMTC) frequency bands. We will activate selected bands for devices to be used in different regions.
| Specifications |
ULTRA INTELEINK P1 |
ULTRA 5G P1 |
|
Weight |
1.8±0.1g |
2.6±0.1g |
|
Dimensions |
17 mm x 12 mm x 8.5 mm |
|
| Working Temp |
-10°C~60°C |
|
| Batttery |
15 mAh lithium polymer rechargeable battery, with under-and-over-charging protection |
|
| Battery Life |
Over 100 GPS positions under optimal GPS satellite view at 5-minute interval |
|
| Solar Type |
GaAs solar unit (30% efficiency) with good performance under weak light |
|
| Antenna Material |
Titanium alloy with protective coating |
|
| Attachment |
Two through holes at two ends, respectively for harness, or glued-on |
|
| GPS Module |
Precision: CEP（50%）5m Maximum update rate: 10 Hz |
|
| Waterproof |
IP68 |
|
| Firmware Upgrade |
Remotely via network, or instantly via INTELINK |
|
| Working Scheulde |
Remotely via network, or instantly via INTELINK |
|
| Data Storage |
Logged data will be stored in memory if network is unavailable. -Flash memory: 16 MB -Regular data storage: 460 days at default setting (1h GPS+1h ENV+10 minBHV) -BOOST data storage: 280,000 pieces -ACC data storage: 28,700 pieces |
|
DATA TYPES
- GPS: longitude, latitude, altitude, geoid height, course, GPS satellite quantity
- ENV: light intensity, temperature, inner air pressure, voltage
- BHV: ODBA (overall dynamic body acceleration)
- ACC: x/y/z acceleration data at 25 Hz (by default)
DATA COLLECTION MODES
User can choose from the following data collection modes, and specify the related parameters to suit the condition and objective of the study.
Regular Mode
- GPS interval: 5 min ~1 day
- ENV interval: 5 min ~1 day
- ODBA interval: 10 min/30 min
- ACC interval: 25 Hz, 3 seconds in every 10 min (by default)
- Above ranges can be set on webpage/App. If other settings are required, please contact us.
Sleep Mode
This mode is to save power by deactivating certain type of data collection for:
- a certain period (from minutes to months)
- a regular period each day (a maximum of 16 hours)
Raw Acceleration Data Collecting
Raw x/y/z acceleration data could be very useful for behavioral research, especially whenthe data can be combined with timestamps, GPS, environmental data, and the bird’s activityrhythm. However, the raw data can seldom be obtained due to its large size.
With INTELINK, the user can not only download the raw data from memory, but also obtainreal-time raw acceleration data by connecting a mobile phone to ULTRA.
INTELLIGENT FREQUENCY OPTIMIZATION (BOOST)
The BOOST function intelligently increases the frequency for data collection when certain conditions are met (good charging, fast movement, etc.).
The default setting is as below:
- Frequency Optimization: GPS at every 10 minutes
- Flight Detection: GPS at every 5 minutes
With BOOST, the device portrays detailed movement tracks and attempts more frequent data transmission without manual intervention, keeping long-term energy balance and avoiding the possibility of battery drain caused by radical settings during bad weather.
Sign Up For Our Newletter
For offers and the latest news on our case studies
